MicroBio MB2-RSH Isolator Microbial Air Sampler

The MicroBio MB2-RSH isolator microbial air sampler has a host of features making it ideal for use in sealed compartments, research, clean rooms, pharmaceutical validation and throughout hospitals. Capable of using both 90 mm Petri dishes or 55 mm contact plates, readily available at low cost with a variety of media makes the MicroBio a very low cost instrument to use. The MicroBio MB2-RSH is an invaluable device for validating isolator cabinets, sealed compartments and rooms.



  MB2-RSH – 220 Hole MB2-RSH – 400 Hole
Sample head 220 holes x 1mm
Stainless steel
400 holes x 0.7mm
Anodised Aluminium
Flow (L/min) 100 100
Sampling Volume per Sample (litres) 25 – 10,000 25 – 10,000
Autonomy (litres) > 60,000 > 60,000
User defined volumes 6 6
d50 (µm) 1.7 1.35
Particle velocity (m/s) 9.65 10.83
LCD display
Microprocessor Control
Start delay 1 min to 3 hours 1 min to 3 hours
90mm Petri
55 mm contact x
Control Unit Tripod mount
Sampling head tripod mount Optional Optional
Control unit dimensions                      196 x 100 x 40 mm
Sampling head dimensions 115 x 100 x 105 mm with attached sampling head
Cable length              1m to 10m with locking connectors
Battery                 4 x AA NiMH cells, 6V
Battery replacement User replaceable for under £15
Fast charger (minutes) 100
Charger UK, Euro, USA, Australia and 12V in-car
Carry Case/Bag
DTI VAM Validated
Warranty 2 years

Supplied with the MB2 Bioaerosol Sampler

  • Petri dish and contact plate spring sets
  • Available with up to 10 metres of cable
  • 220 x 1.0 mm hole stainless steel or 400 x 0.7 mm hole anodised aluminium sampling head
  • Multi-voltage world-wide charger with UK, Euro, USA, Australia and 12V in-car plugs
  • Ansmann maxE NiMH cells – pre-charged so the MB2 is ready to use out of the box
  • Certificate of Calibration